512-736-8870

Water heaters are an out of sight, out of mind appliance. Luckily they are typically created to be so. Even with hot water heaters at this time available being well built with energy efficiency in mind, there are items house owners are capable of doing to stretch ones water heating energy bill even more.

Where to Save on Ones Austin Water Heating Costs

Take a look at the Thermostat Temperature SettingAustin Water Heating Cost Savings

If you haven’t seen the temperature level the hot water heater is established at, now could be a great time to do so. The factory setting is ordinarily approximately 140 degrees. Most house owners don’t need it to be set that high in the event that there are some health considerations one has. There is additional information on water heater temperature options here. Even changing down the temperature by 10°F can reduce energy costs by about $6 per month. The common house owner does not need to set the water heater higher than 120°, so think about turning yours lower in case it is.

Decrease Hot Water Usage

Here are some thoughts on how to lessen the hot water usage at home while not having a lot of impact on how one lives.
Clean the bulk of clothes in the washing machine in cold water: Most laundry detergents are developed for cold water use currently therefore take advantage of them.
Take showers in place of baths. Normally, baths take 12-15 gallons of water, while showers typically only make use of 5-9 gallons.
If renovating or changing sink faucets, add dual handle faucets. Single handle faucet will use some hot water when it is not needed. Regardless of whether the handle is moved straight up results in hot water to be used. Single handle faucets can help get rid of the use of hot water any time it is unnecessary.

Fix any water drips and leaks. We will not get into details here, nevertheless, even a small drip can calculate into a significant volume of water over the course of a month! Be sure to get any faucet drip mended as quickly as possible.

Adding Insulation to the Water Heater

It is smart to insulate the water heater and the hot water pipes. Insulated covers can be found to cover the storage tank to keep the stored heated water hot. Todays water heaters are manufactured with exceptional built-in insulation of the water storage tank, but every tiny bit can certainly help, particularly if the water heater is placed within a non-heated part of the house, such as a garage. All hot water pipes leaving the water heater should be wrapped in pipe insulation as well. It is especially important for pipes that run through a garage, crawl space, or other area not warm.

Flush the Water Heater Regularly

Property owners need to ensure they’re executing a little regular upkeep on the water heater to make sure it functions as effortlessly as possible. This will save on energy usage and prolong the life of the hot water heater. Through flushing the storage tank and checking the anode rod goes a long way in executing this.

Install a More Efficient Water Heater

Whenever it is time to get a new water heater, get one that is as energy efficient as you are able to invest in. In the long run it will definitely pay off!

If you have got any questions with an Austin water heater repair or perhaps if you are not certain whether it is getting close to needing a new water heater, do not wait to contact us.